Epoxy resin can bond to teak oiled wood, but it's not a simple task. The natural oils in teak create a challenging surface for adhesion. However, with the right approach, you can achieve a strong bond.
1. Understanding the Surface
● Teak is a hardwood known for its natural oils. These oils can create a barrier that may prevent the epoxy resin from adhering properly. When the wood is freshly oiled, the epoxy may have difficulty bonding because the oil forms a slick layer on the surface.
2. Surface Preparation
● Cleaning: The first step is to clean the wood surface thoroughly. Use a solvent like acetone or denatured alcohol to remove any dirt, dust, and loose oils. However, be careful not to soak the wood as this can cause damage.
● Sanding: Lightly sand the surface of the teak wood. Sanding helps to create a rougher texture on the wood, which provides more surface area for the epoxy to grip. Start with a medium - grit sandpaper (around 120 - 150 grit) and then finish with a finer grit (220 - 320 grit) to smooth out any scratches. This process also helps to remove some of the surface oils.
● Degreasing: After sanding, it's a good idea to degrease the surface again. You can use a commercial degreaser or a mixture of trisodium phosphate (TSP) and water. This further reduces the oil content on the wood and enhances the adhesion of the epoxy.
3. Applying the Epoxy
● Priming: In some cases, using a wood primer designed to bond with epoxy can be beneficial. The primer creates an intermediate layer that helps the epoxy adhere more effectively to the wood.
● Epoxy Application: When applying the epoxy to Teak Outdoor Furniture, make sure to follow the manufacturer's instructions. Pour the epoxy onto the center of the prepared surface of the Teak outdoor furniture. Use a spreader (such as a squeegee or a brush) to spread it evenly across the surface of the teak outdoor furniture. Work in a well - ventilated area and allow the epoxy to cure completely according to the recommended time and temperature conditions.
If these steps are followed properly, epoxy resin can successfully stick to teak oiled wood and provide a durable finish.
